UEA332 Series
Dynamic Vibration IEPE Ultrasound Sensor, 1/4-28 Mounting, Side Exit 2 Pin Mini-MIL Connector, 100 mV/g, ±10%
Product Features
High Frequency Ultrasound Accelerometer
High Amplitude Resonance Peak for Stress Wave Measurement Techniques
- For use with MH149-1A Magnet & MH130-4A Mounting Target
- IEPE Amplifier Technology
- 2 Pin Mini-MIL Connection or Integral Cable
Note: Integral Cable Options are only for Permanent Monitoring Applications
UEA332
2 Pin Connector
| Connector Pin | Polarity |
| A | (+) Signal/Power |
| B | (-) Common |
Stock Product
UEA432
Molded Integral Cable
| Conductor | Polarity |
| Red | (+) Signal/Power |
| Black | (-) Common |
| Shield | Cable Drain Wire |
Built To Order
| Specifications | Standard | Metric | |
|---|---|---|---|
| Part Number | UEA332 | ||
| Sensitivity (±10%) | 100 mV/g | ||
| Frequency Response (±3dB) | 60-1,020,000 CPM | 1 Hz - 17 kHz | |
| Frequency Response (±10%) | 120-600,000 CPM | 2 Hz - 10 kHz | |
| Dynamic Range | ± 50g, peak | ||
| Peak Sensitivity | +21 dB ± 2 dB | ||
| Electrical | |||
| Settling Time | < 2 Seconds | ||
| Voltage Source (IEPE) | 18-30 VDC | ||
| Constant Current Excitation | 2-10 mA | ||
| Spectral Noise @ 10 Hz | 30 µg/√Hz | ||
| Spectral Noise @ 100 Hz | 4 µg/√Hz | ||
| Spectral Noise @ 1000 Hz | 2 µg/√Hz | ||
| Output Impedance | < 100 ohm | ||
| Bias Output Voltage | 10-14 VDC | ||
| Case Isolation | > 108 ohm |
| Specifications | Standard | Metric | |
|---|---|---|---|
| Environmental | |||
| Temperature Range | -58 to 250°F | -50 to 121°C | |
| Maximum Shock Protection | 10,000g, peak | ||
| Electromagnetic Sensitivity | CE | ||
| Sealing | Welded, Hermetic | ||
| Physical | |||
| Sensing Element | PZT Ceramic | ||
| Sensing Structure | Shear Mode | ||
| Weight | 1.5 oz | 43 grams | |
| Case Material | 316L Stainless Steel | ||
| Mounting | 1/4-28 Integral Stud | ||
| Connector (Non-Integral) | 2 Pin mini-MIL, J Series Connector |
||
| Resonant Frequency | 520,000 CPM ±12,000 CPM | 42 kHz ±2kHz | |
| Mounting Torque | 2 to 5 ft. lbs. | 2,7 to 6,8 Nm | |
| Calibration Certificate | CA10 |
Typical Frequency Response
