TA217 Series
Dual Output Sensor, Temperature & Acceleration, Top Exit 3 Pin Connector, 50 mV/g, 10 mV/°C, ±10%
Product Features
Temperature Output 10 mV/°C
High Performance in a Low Cost Sensor
- Standard 3 Pin MIL Connection
- Temperature and Acceleration in One Sensor
- Requires Multi-Conductor Cable
TA217-1A
3 Pin Connector
| Connector Pin | Polarity |
| A | (+) Signal/Power |
| B | (-) Common |
| C | (+) Temperature Voltage |
Stock Product
TA217-2A
CB105 Integral Cable
| Conductor | Polarity |
| Red | (+) Signal/Power |
| Black | (-) Common |
| White | (+) Temperature Voltage |
| Shield | Cable Drain Wire |
Built To Order
TA217-3A
CB218 Armored Integral Cable
| Conductor | Polarity |
| Red | (+) Signal/Power |
| Black | (-) Common |
| White | (+) Temperature Voltage |
| Shield | Cable Drain Wire |
Built To Order
| Specifications | Standard | Metric | |
|---|---|---|---|
| Part Number | TA217 | M/TA217 | |
| Sensitivity (±10%) | 50 mV/g | ||
| Frequency Response (±3dB) | 60-750,000 CPM | 1,0-12500 Hz | |
| Frequency Response (±10%) | 240-540,000 CPM | 4,0-9000 Hz | |
| Dynamic Range | ± 100 g, peak | ||
| Temperature Measurement Range | -40 to 250°F | -40 to 121°C | |
| Temperature Output | 10 mV/°C | ||
| Temperature Sensor | 750 mV = 25 °C (±1) | ||
| Electrical | |||
| Settling Time | <2.5 seconds | ||
| Voltage Source (IEPE) | 18-30 VDC | ||
| Constant Current Excitation | 2-10 mA | ||
| Spectral Noise @ 10 Hz | 14 µg/√Hz | ||
| Spectral Noise @ 100 Hz | 2.3 µg/√Hz | ||
| Spectral Noise @ 1000 Hz | 2 µg/√Hz | ||
| Output Impedance | <100 ohm | ||
| Bias Output Voltage | 10-14 VDC | ||
| Case Isolation | >108 ohm |
| Specifications | Standard | Metric | |
|---|---|---|---|
| Environmental | |||
| Temperature Range | -40 to 250°F | -40 to 121°C | |
| Maximum Shock Protection | 5,000 g, peak | ||
| Electromagnetic Sensitivity | CE | ||
| Sealing | IP68 | ||
| Physical | |||
| Sensing Element | PZT Ceramic | ||
| Sensing Structure | Shear Mode | ||
| Weight | 3.2 oz | 90 grams | |
| Case Material | 316L Stainless Steel | ||
| Mounting | 1/4-28 | ||
| Connector (Non-Integral) | 3 Pin MIL-C-5015 | ||
| Resonant Frequency | 1,380,000 CPM | 23000 Hz | |
| Mounting Torque | 2 to 5 ft. lbs. | 2,7 to 6,8 Nm | |
| Mounting Hardware | 1/4-28 Stud | M6x1 Adapter Stud | |
| Calibration Certificate | CA10 |
Typical Frequency Response
