MCB211 Series
High Frequency, Lightweight Underwater Accelerometer, Top Exit Molded Integral Cable, 10-32 Mounting, 10 mV/g, ±10%
Product Features
- Nylon Overmolded Accelerometer
- IP68 Rated
- High Frequency, 30 kHz Response
MCB211
CB127 Integral Cable
| Conductor | Polarity |
| Red | (+) Signal/Power |
| Black | (-) Common |
Built To Order
| Specifications | Standard | Metric | |
|---|---|---|---|
| Part Number | MCB211 | MCB221 | |
| Sensitivity (±10%) | 10 mV/g | ||
| Frequency Response (±3dB) | 30-1,800,000 CPM | 0.5 Hz-30 kHz | |
| Frequency Response (±10%) | 60-900,000 CPM | 1 Hz-15 kHz | |
| Frequency Response (±5%) | 120-600,000 CPM | 2 Hz-10 kHz | |
| Dynamic Range | ± 500 g, peak | ||
| Electrical | |||
| Settling Time | < 2 Seconds | ||
| Voltage Source (IEPE) | 18-30 VDC | ||
| Constant Current Excitation | 2-10 mA | ||
| Spectral Noise @ 10 Hz | 100 µg/√Hz | ||
| Spectral Noise @ 100 Hz | 19 µg/√Hz | ||
| Spectral Noise @ 1000 Hz | 5 µg/√Hz | ||
| Output Impedance | < 100 ohm | ||
| Bias Output Voltage | 10-14 VDC | ||
| Case Isolation | >108 ohm |
| Specifications | Standard | Metric | |
|---|---|---|---|
| Environmental | |||
| Temperature Range | -58 to 250°F | -50 to 121°C | |
| Maximum Shock Protection | 10,000 g, peak | ||
| Electromagnetic Sensitivity | CE Approved | ||
| Sealing | IP68 Integrally Molded Cable | ||
| Physical | |||
| Sensing Element | PZT Ceramic | ||
| Sensing Structure | Shear Mode | ||
| Weight | 0.35 oz | 10 grams | |
| Mounting Base | 316L Stainless Steel | ||
| Mounting | 10-32 UNF | ||
| Cable Jacket Diameter | 0.14 in (3.6 mm) | ||
| Cable Jacket Material | Polyurethane | ||
| Cable Conductor | 26 AWG Twisted Shielded Pair |
||
| Resonant Frequency | 2,640,000 CPM | 44 kHz | |
| Mounting Hardware | 10-32 Stud | M5 Stud | |
| Calibration Certificate | CA10 |
Typical Frequency Response
