LP832 Series
Low Capacitance, Class I, Division 2 (ATEX Zone 2) Loop Power Sensor, 4-20 mA Output Proportional to Vibration in Velocity, Top Exit 2 Pin Connector
Product Features
Continuous Monitoring in Hazardous Locations
Acceleration 4-20 Output for Higher Frequency Applications
- Must Use “Class I, Division 2” CB190 Cable and D2Q Connector or CB922 Series Cable Adapter or Integral Cable
- Non-Arcing, Non-Sparking Sensor for Class I, Division 2
- Vibration Alarms for Process Control
LP832-XXX-1B
2 Pin Connector
| Connector Pin | Polarity |
| A | (+) Loop Power mA Output |
| B | (-) Common |
Built To Order
LP832-XXX-2C
Integral Cable (CB190)
| Conductor | Polarity |
| Red | (+) Loop Power mA Output |
| Black | (-) Common |
| Shield | Cable Drain Wire |
Built To Order
LP832-XXX-3C
Armored Integral Cable (CB206)
| Conductor | Polarity |
| Red | (+) Loop Power mA Output |
| Black | (-) Common |
| Shield | Cable Drain Wire |
Built To Order
| Specifications | Standard | Metric | |
|---|---|---|---|
| Part Number | LP832 | ||
| Tolerance: 4 mA | (± 10%) | ||
| Tolerance: 20 mA | (± 10%) | ||
| Electrical | |||
| Settling Time | <60 Seconds | ||
| Voltage Source (IEPE) | 12-28 VDC | ||
| Case Isolation | >108 ohm | ||
| Environmental | |||
| Temperature Range | -40 to 176°F | -40 to 80°C | |
| Electromagnetic Sensitivity | CE | ||
| Sealing | Welded, Hermetic |
| Specifications | Standard | Metric | |
|---|---|---|---|
| Physical | |||
| Sensing Element | PZT Ceramic | ||
| Sensing Structure | Shear Mode | ||
| Weight | 3.7 oz | 105 grams | |
| Case Material | 316L Stainless Steel | ||
| Mounting | 1/4-28 | ||
| Connector (Non-Integral) | 2 Pin MIL-C-5015 | ||
| Mounting Torque | 2 to 5 ft. lbs. | 2,7 to 6,8 Nm | |
| Mounting Hardware | 1/4-28 Stud | M6x1 Adapter Stud | |
| Calibration Certificate | Current Output @ 100 Hz |
Ordering Information
