LP284-M12E Series
Loop Power Sensor, 4-20 mA Output Proportional to Vibration in Velocity, Side Exit 4 Pin Connector, M8 Captive Bolt
Product Features
Continuously Monitor & Protect Important Machinery
Transmit Signals
- 4-20 mA current proportional to Vibration
- M8 Captive Bolt
- Customize Your Settings to Focus on the Most Important Frequencies
LP284-XXX-M12E
4 Pin Connector
| Connector Pin | Polarity |
| 1 | (+) Signal/Power |
| B | (-) Common |
| 3 | Not Used |
| 4 | Not Used |
Built To Order
| Specifications | Standard | Metric | |
|---|---|---|---|
| Part Number | LP284-M12E | M/LP284-M12E | |
| Tolerance: 4 mA | (± 10%) | ||
| Tolerance: 20 mA | (± 10%) | ||
| Electrical | |||
| Settling Time | <30 Seconds | ||
| Voltage Source (IEPE) | 15-30 VDC | ||
| Case Isolation | >108 ohm | ||
| Environmental | |||
| Temperature Range | -40 to 212°F | -40 to 100°C | |
| Electromagnetic Sensitivity | CE | ||
| Sealing | Welded, Hermetic | ||
| Submersible Depth | 200 ft. | 30 m |
| Specifications | Standard | Metric | |
|---|---|---|---|
| Physical | |||
| Sensing Element | PZT Ceramic | ||
| Sensing Structure | Shear Mode | ||
| Weight | 5.8 oz | 164 grams | |
| Case Material | 316L Stainless Steel | ||
| Mounting | 1/4-28 | ||
| Connector (Non-Integral) | 4 Pin M12 | ||
| Mounting Torque | 2 to 5 ft. lbs. | 2,7 to 6,8 Nm | |
| Mounting Hardware | 1/4-28 Captive Bolt | M6x1 Captive Bolt | |
| Calibration Certificate | Current Output @ 100 Hz |
Ordering Information
