LP202 Series
Loop Power Sensor, 4-20 mA Output Proportional to Vibration in Velocity, Top Exit 2 Pin Connector
Product Features
Continuously Monitor & Protect Important Machinery
- 4-20 mA current proportional to Vibration
- Transmit Signals Over Long Distances with No Signal Loss
- Customize Your Settings to Focus on the Most Important Frequencies
LP202-XXX-1E
2 Pin Connector
| Connector Pin | Polarity |
| A | (+) Loop Power mA Output |
| B | (-) Common |
Built To Order
LP202-XXX-2E
CB103 Integral Cable
| Conductor | Polarity |
| Red | (+) Loop Power mA Output |
| Black | (-) Common |
| Shield | Cable Drain Wire |
Built To Order
LP202-XXX-3E
CB206 Armored Integral Cable
| Conductor | Polarity |
| Red | (+) Loop Power mA Output |
| Black | (-) Common |
| Shield | Cable Drain Wire |
Built To Order
| Specifications | Standard | Metric | |
|---|---|---|---|
| Part Number | LP202 | M/LP202 | |
| Tolerance: 4 mA | (± 10%) | ||
| Tolerance: 20 mA | (± 10%) | ||
| Electrical | |||
| Settling Time | <30 Seconds | ||
| Voltage Source (IEPE) | 15-30 VDC | ||
| Case Isolation | >108 ohm | ||
| Environmental | |||
| Temperature Range | -40 to 212°F | -40 to 100°C | |
| Electromagnetic Sensitivity | CE | ||
| Sealing | Welded, Hermetic | ||
| Submersible Depth | 200 ft. | 60 m |
| Specifications | Standard | Metric | |
|---|---|---|---|
| Physical | |||
| Sensing Element | PZT Ceramic | ||
| Sensing Structure | Shear Mode | ||
| Weight | 2.9 oz | 82 grams | |
| Case Material | 316L Stainless Steel | ||
| Mounting | 1/4-28 | ||
| Connector (Non-Integral) | 2 Pin MIL-C-5015 | ||
| Mounting Torque | 2 to 5 ft. lbs. | 2,7 to 6,8 Nm | |
| Mounting Hardware | 1/4-28 Stud | M6x1 Adapter Stud | |
| Calibration Certificate | Current Output @ 100 Hz |
Ordering Information
