AC934 Series
Low Capacitance, Class I, Division 2 / Zone 2 Accelerometer, Side Exit 2 Pin Connector, 50 mV/g, ±10%
Product Features
Class I, Division 2 / Zone 2 Rating
Must use "Class I, Division 2" CB190 or CB296 Cable and Q2A or Q2N Connectors
- ±100 g, Dynamic Range
- 0,8-8600 Hz (48-516,000 CPM) Frequency Response
- Standard 2 Pin MIL Connection or Integral Cable
Note: Integral Cable Options are only for Permanent Monitoring Applications
AC934-1A
2 Pin Connector
| Connector Pin | Polarity |
| A | (+) Signal/Power |
| B | (-) Common |
Stock Product
AC934-2C
CB190 Integral Cable
| Conductor | Polarity |
| Red | (+) Signal/Power |
| Black | (-) Common |
| Shield | Cable Drain Wire |
Built To Order
AC934-3C
CB296 Armored Integral Cable
| Conductor | Polarity |
| Red | (+) Signal/Power |
| Black | (-) Common |
| Shield | Cable Drain Wire |
Built To Order
| Specifications | Standard | Metric | |
|---|---|---|---|
| Part Number | AC934 | M/AC934 | |
| Sensitivity (±10%) | 50 mV/g | ||
| Frequency Response (±3dB) | 48-516,000 CPM | 0,8-8600 Hz | |
| Frequency Response (±10%) | 90-300,000 CPM | 1,5-5000 Hz | |
| Dynamic Range | ± 100 g, peak | ||
| Electrical | |||
| Settling Time | <3 Seconds | ||
| Voltage Source (IEPE) | 18-28 VDC | ||
| Constant Current Excitation | 2-10 mA | ||
| Spectral Noise @ 10 Hz | 35 µg/√Hz | ||
| Spectral Noise @ 100 Hz | 25 µg/√Hz | ||
| Spectral Noise @ 1000 Hz | 25 µg/√Hz | ||
| Output Impedance | <100 ohm | ||
| Bias Output Voltage | 10-14 VDC | ||
| Case Isolation | >108 ohm |
| Specifications | Standard | Metric | |
|---|---|---|---|
| Environmental | |||
| Temperature Range | -40 to 250°F | -40 to 121°C | |
| Maximum Shock Protection | 5,000 g, peak | ||
| Electromagnetic Sensitivity | CE | ||
| Sealing | IP68 | ||
| Submersible Depth | 200 ft. | 91 m | |
| SIL Rating | SIL 2 | ||
| Physical | |||
| Sensing Element | PZT Ceramic | ||
| Sensing Structure | Shear Mode | ||
| Weight | 5.3 oz | 151 grams | |
| Case Material | 316L Stainless Steel | ||
| Mounting | 1/4-28 | ||
| Connector (Non-Integral) | 2 Pin MIL-C-5015 | ||
| Resonant Frequency | 1,260,000 CPM | 21000 Hz | |
| Mounting Torque | 2 to 5 ft. lbs. | 2,7 to 6,8 Nm | |
| Mounting Hardware | 1/4-28 Captive Bolt | M6x1 Captive Bolt | |
| Calibration Certificate | CA10 |
Typical Frequency Response
