AC314 Series
Low Voltage Accelerometer, Side Exit 3 Pin Connector, 25 mV/g, ±10%
Product Features
Ultra Low Power Sensor
For Battery Powered Systems
- Compatible with Many Wireless Transmission Systems
- Supply Voltage 3-5 Volts
- 3 Pin MIL Connection or Integral Cable
Note: Integral Cable Options are only for Permanent Monitoring Applications
AC314-1A
3 Pin Connector
| Connector Pin | Polarity |
| A | (+) Power |
| B | (-) Common |
| C | (+) Signal |
Stock Product
AC314-2C
CB105 Integral Cable
| Conductor | Polarity |
| Red | (+) Power |
| Black | (-) Common |
| White | (+) Signal |
Built To Order
AC314-3C
CB218 Armored Integral Cable
| Conductor | Polarity |
| Red | (+) Power |
| Black | (-) Common |
| White | (+) Signal |
Built To Order
| Specifications | Standard | Metric | |
|---|---|---|---|
| Part Number | AC314 | M/AC314 | |
| Sensitivity (±10%) | 25 mV/g | ||
| Frequency Response (±3dB) | 30-600,000 CPM | 0,5-10000 Hz | |
| Frequency Response (±10%) | 60-480,000 CPM | 1,0-8000 Hz | |
| Dynamic Range | ± 50 g, peak | ||
| Electrical | |||
| Settling Time | < 1 second | ||
| Voltage Source (IEPE) | 3-5 VDC (10%) | ||
| Spectral Noise @ 10 Hz | 60 µg/√Hz | ||
| Spectral Noise @ 100 Hz | 20 µg/√Hz | ||
| Spectral Noise @ 1000 Hz | 5 µg/√Hz | ||
| Output Impedance | < 100 ohm | ||
| Bias Output Voltage | 1.5 V ± 10 % | ||
| Case Isolation | > 108 ohm | ||
| Supply Current | < 20 µA |
| Specifications | Standard | Metric | |
|---|---|---|---|
| Environmental | |||
| Temperature Range | -58 to 250°F | -50 to 121°C | |
| Maximum Shock Protection | 5,000 g, peak | ||
| Sealing | IP68 | ||
| Physical | |||
| Sensing Element | PZT Ceramic | ||
| Sensing Structure | Shear Mode | ||
| Weight | 5.1 ounces | 145 grams | |
| Case Material | 316L Stainless Steel | ||
| Mounting | Captive Bolt | ||
| Connector (Non-Integral) | 3 Pin MIL-C-5015 | ||
| Resonant Frequency | 1,260,000 CPM | 21000 Hz | |
| Mounting Torque | 2 to 5 ft. lbs. | 2,7 to 6,8 Nm | |
| Mounting Hardware | 1/4-28 Captive Bolt | M6x1 Captive Bolt | |
| Calibration Certificate | CA10 |
Typical Frequency Response
