AC288 Series
High Temperature IEPE Accelerometer, 325 °F (162 °C) Max Temp, M8 Captive Bolt, Side Exit 2 Pin Connector, 100 mV/g, ±10%
Product Features
High Temperature (325°F) Side Exit Sensor
- Functional to Temperatures up to 325°F (162°C)
- Great for Extended use at High Temperatures
- Monitors in Temperatures as Low as -58°F (-50°C)
AC288-1D
2 Pin Connector
| Connector Pin | Polarity |
| A | (+) Signal/Power |
| B | (-) Common |
Stock Product
AC288-5D
CB206 Armored Integral Cable
| Conductor | Polarity |
| Red | (+) Signal/Power |
| Black | (-) Common |
| Shield | Cable Drain Wire |
Built To Order
AC288-6D
CB611 Heavy Duty Armored Integral Cable
| Conductor | Polarity |
| Red | (+) Signal/Power |
| Black | (-) Common |
| Shield | Cable Drain Wire |
Built To Order
| Specifications | Standard | Metric | |
|---|---|---|---|
| Part Number | AC288 | ||
| Sensitivity (±10%) | 100 mV/g | ||
| Frequency Response (±3dB) | 30-480,000 CPM | 0,5-8000 Hz | |
| Frequency Response (±10%) | 120-180,000 CPM | 2,0-3000 Hz | |
| Dynamic Range | ± 80 g, peak | ||
| Electrical | |||
| Settling Time | <2.5 seconds | ||
| Voltage Source (IEPE) | 18-30 VDC | ||
| Constant Current Excitation | 2-10 mA | ||
| Spectral Noise @ 10 Hz | 8 µg/√Hz | ||
| Spectral Noise @ 100 Hz | 0.82 µg/√Hz | ||
| Spectral Noise @ 1000 Hz | 0.3 µg/√Hz | ||
| Output Impedance | <100 ohm | ||
| Bias Output Voltage | 10-14 VDC | ||
| Case Isolation | >108 ohm |
| Specifications | Standard | Metric | |
|---|---|---|---|
| Environmental | |||
| Temperature Range | -58 to 325°F | -50 to 162°C | |
| Maximum Shock Protection | 5,000 g, peak | ||
| Electromagnetic Sensitivity | CE | ||
| Sealing | Welded, Hermetic | ||
| Physical | |||
| Sensing Element | PZT Ceramic | ||
| Sensing Structure | Shear Mode | ||
| Weight | 6 oz | 170 grams | |
| Case Material | 316L Stainless Steel | ||
| Mounting | M8 Captive Bolt | ||
| Connector (Non-Integral) | 2 Pin MIL-C-5015 | ||
| Resonant Frequency | 1,200,00 CPM | 20000 Hz | |
| Mounting Torque | 2 to 5 ft. lbs | 2,7 to 6,8 Nm | |
| Mounting Hardware | M8 Captive Bolt | ||
| Calibration Certificate | CA10 |
Typical Frequency Response
