AC214 Series
Low Frequency Accelerometer, Top Exit 2 Pin Connector, 1,000 mV/g, ±5%
Product Features
Designed for Low Speed Rotors, Wind Turbine Main Bearings, Gear Box Inputs, and May Also Be Used for High Frequency Detection.
May be used with any application that requires low and high frequency measurements.
- 1000 mV/g Sensitivity
- 0.1 Hz to 10 kHz Frequency Response (± 3dB)
- Standard 2 Pin MIL Connection or Integral Cable
Note: Integral Cable Options are only for Permanent Monitoring Applications
AC214-1D
2 Pin Connector
| Connector Pin | Polarity |
| A | (+) Signla/Power |
| B | (-) Common |
Stock Product
AC214-2D
CB103 Integral Cable
| Conductor | Polarity |
| Red | (+) Signal/Power |
| Black | (-) Common |
| Shield | Cable Drain Wire |
Built To Order
AC214-3D
CB206 Armored Integral Cabel
| Conductor | Polarity |
| Red | (+) Signal/Power |
| Black | (-) Common |
| Shield | Cable Drain Wire |
Built To Order
| Specifications | Standard | Metric | |
|---|---|---|---|
| Part Number | AC214 | M/AC214 | |
| Sensitivity (±5%) | 1000 mV/g | ||
| Frequency Response (±3dB) | 6-600,000 CPM | 0,1-10000 Hz | |
| Frequency Response (±10%) | 18-480,000 CPM | 0,3-8000 Hz | |
| Dynamic Range | ± 7 g, peak | ||
| Electrical | |||
| Settling Time | < 2 seconds | ||
| Voltage Source (IEPE) | 18-30 VDC | ||
| Constant Current Excitation | 2-10 mA | ||
| Spectral Noise @ 10 Hz | 1.3 µg/√Hz | ||
| Spectral Noise @ 100 Hz | 0.2 µg/√Hz | ||
| Spectral Noise @ 1000 Hz | 0.1 µg/√Hz | ||
| Output Impedance | < 100 ohm | ||
| Bias Output Voltage | 10-14 VDC | ||
| Case Isolation | > 108 ohm |
| Specifications | Standard | Metric | |
|---|---|---|---|
| Environmental | |||
| Temperature Range | -58 to 250°F | -50 to 121°C | |
| Maximum Shock Protection | 5000 g, peak | ||
| Electromagnetic Sensitivity | CE | ||
| Sealing | Welded, Hermetic | ||
| SIL Rating | SIL 2 | ||
| Physical | |||
| Sensing Element | PZT Ceramic | ||
| Sensing Structure | Shear Mode | ||
| Weight | 3.25 oz | 92 g | |
| Case Material | 316L Stainless Steel | ||
| Mounting | 1/4-28 | ||
| Connector (Non-Integral) | 2 Pin MIL-C-5015 | ||
| Resonant Frequency | 1,020,000 CPM | 17000 Hz | |
| Mounting Torque | 2 to 5 ft. lbs. | 2.7 to 6.8 Nm | |
| Mounting Hardware | 1/4-28 Stud | M6x1 Adapter Stud | |
| Calibration Certificate | CA10 |
Typical Frequency Response
