AC133 Series
Low Frequency Accelerometer, Top Exit 2 Pin Connector, 500 mV/g, ±10%
Product Features
Designed for low speed Rotors, Main Bearings, and Gear Box Inputs, but can also be used for High Frequency Detection.
Can be used with any application that requires low and high frequency measurements.
- 500 mV/g Sensitivity, ±10% Sensitivity
- 0.1 Hz for Low Frequency Measurements
- 10,000 Hz for High Frequency Detection
AC133-1D
2 Pin Connector
| Connector Pin | Polarity |
| A | (+) Signal/Power |
| B | (-) Common |
Stock Product
AC133-2D
CB103 Integral Cable
| Conductor | Polarity |
| Red | (+) Signal/Power |
| Black | (-) Common |
| Shield | Cable Drain Wire |
Built To Order
AC133-3D
CB206 Armored Integral Cable
| Conductor | Polarity |
| Red | (+) Signal/Power |
| Black | (-) Common |
| Shield | Cable Drain Wire |
Built To Order
AC133-6D
CB611 Heave Duty Armored Integral Cable
| Conductor | Polarity |
| Red | (+) Signal/Power |
| Black | (-) Common |
| Shield | Cable Drain Wire |
Built To Order
| Specifications | Standard | Metric | |
|---|---|---|---|
| Part Number | AC133 | M/AC133 | |
| Sensitivity (±10%) | 500 mV/g | ||
| Frequency Response (±3dB) | 6-600,000 CPM | 0,1-10000 Hz | |
| Frequency Response (±10%) | 36-180,000 CPM | 0,6-3000 Hz | |
| Dynamic Range | ± 10 g, peak | ||
| Electrical | |||
| Settling Time | <2 Seconds | ||
| Voltage Source (IEPE) | 18-30 VDC | ||
| Constant Current Excitation | 2-10 mA | ||
| Spectral Noise @ 10 Hz | 1.7 µg/√Hz | ||
| Spectral Noise @ 100 Hz | 0.2 µg/√Hz | ||
| Spectral Noise @ 1000 Hz | 0.12 µg/√Hz | ||
| Output Impedance | <100 ohm | ||
| Bias Output Voltage | 10-14 VDC | ||
| Case Isolation | >108 ohm |
| Specifications | Standard | Metric | |
|---|---|---|---|
| Environmental | |||
| Temperature Range | -58 to 250°F | -50 to 121°C | |
| Maximum Shock Protection | 5,000 g, peak | ||
| Electromagnetic Sensitivity | CE | ||
| Sealing | Welded, Hermetic | ||
| Submersible Depth | 200 ft. | 60 m | |
| SIL Rating | SIL 2 | ||
| Physical | |||
| Sensing Element | PZT Ceramic | ||
| Sensing Structure | Shear Mode | ||
| Weight | 3.4 oz | 92 grams | |
| Case Material | 316L Stainless Steel | ||
| Mounting | 1/4-28 | ||
| Connector (Non-Integral) | 2 Pin MIL-C-5015 | ||
| Resonant Frequency | 1,080,000 CPM | 18000 Hz | |
| Mounting Torque | 2 to 5 ft. lbs. | 2,7 to 6,8 Nm | |
| Mounting Hardware | 1/4-28 Stud | M6x1 Adapter Stud | |
| Calibration Certificate | CA10 |
Typical Frequency Response
